• barium_titanate_e1_73-500x500

Barium Titanate E1 Grade (BaTiO3-1)

BARIUM TITANATE E1 Grade

Product Application

The reaction between the oxides of Group II elements and Titanium Dioxide forms a series of titanate phases of general formula MxTiyOx+2y. These compounds are of technical interest because of their ferroelectric properties resulting from the large difference in size between for example the Ba2+ ion (1.43A) and the Ti4+ ion (0.60A).

Categories: ,

Product Description

BARIUM TITANATE E1 Grade

Product Application

The reaction between the oxides of Group II elements and Titanium Dioxide forms a series of titanate phases of general formula MxTiyOx+2y. These compounds are of technical interest because of their ferroelectric properties resulting from the large difference in size between for example the Ba2+ ion (1.43A) and the Ti4+ ion (0.60A). This allows the Ti4+ ion a high degree of mobility in the octahedral lattice. Application of an electric field to the crystal causes polarisation as the titanium Ti4+ ions are drawn over to one side of the octahedron. The tetragonal crystalline form also has a very high dielectric constant which varies with temperature. These phenomena make Titanate compounds especially important for the manufacture of ceramic capacitors in which BaTiO3 is usually the major component.

Typical Analysis

E.1 Grade (a high purity, fine particle size powder with excess Barium stoichiometry)

Percentage by weight
Barium Oxide BaO 64.50
Titanium Dioxide TiO2 34.00
Alumina Al2O3 0.20
Silica SiO2 0.13
Strontia SrO 0.95
Calcium Oxide CaO 0.05
Magnesia MgO 0.05
Sodium Oxide Na2O 0.05

 

(BaO+SrO/TiO2 mole ratio = 1.01)

Physical Properties

Specific Gravity: 6.01

Melting Point: 1705°C

Loss on ignition: <0.5% (1 hr at 1000°C)

Particle Size Distribution:

95% less than 5.0 microns
50% less than 1.7 microns
(Determined by Malvern Mastersizer 2000)

Request A Quote

Your Name (required)

Your Email (required)

Subject

Your Message

Input this code: captcha